Structural · S-XGB7G

Silencer Support Frame

Materials

Steel

Elements

Columns Beams Floors / Slabs Arches Bracing Anchors / Embeds Connections / Plates

Connections

Bracing Connection Bolted Connection Deck Attachment Embed Plate

About this detail

A silencer support frame is anchored to an 8-inch slab-on-grade with P2073A square base plates secured by four 3/8-inch diameter DeWalt Snake+ anchors with 1-5/8-inch nominal embedment at each support frame post. The P1001 posts are spaced at 4'-0" on center maximum, with P1000 diagonal braces tying into the assembly. Connection details incorporate an L2x2x1/4 by 0'-2" long angle attached to the header with one 1/2-inch diameter through bolt and one powder-actuated fastener per angle, along with two 1/2-inch diameter through bolts and a 1/4-inch plate connecting to a mullion post beyond. A drawing note indicates the detail is for concept purposes only, with connection and framing designated as deferred submittals by others.

Members view this detail in full resolution, download the CAD files (SVG, PDF), and can adapt it in the built-in CAD editor — export DXF, DWG, or PDF.

Start membership

Similar details