Cold-formed steel studs back to back with a closure track match the track gauge to the stud and are required at the end of the wall or at the jamb. The bottom track of the panel sets into a bottom sill track attached to a concrete slab with four zero point one four three inch diameter powder driven fasteners. At the disconnected track, a one foot zero inch section of stud with four number ten screws on each side provides transition. Number ten screws at twelve inches on center on each side secure the assembly, while two rows of number ten screws at twelve inches on center staggered are placed vertically with a six inch maximum and one inch maximum spacing.
Members view this detail in full resolution, download the CAD files (SVG, PDF), and can adapt it in the built-in CAD editor — export DXF, DWG, or PDF.
Start membership