Structural · S-FNA5K

Grade Beam Reinforcement and Anchor Rod Detail

Materials

Concrete Masonry / CMU

Elements

Beams Floors / Slabs Foundations / Footings Expansion / Control Joints Anchors / Embeds Reinforcing

Connections

Rebar Splice / Development Embed Plate

About this detail

A cast-in-place concrete grade beam features top and bottom reinforcement sized per the grade beam schedule, incorporating number five closure cap ties at each stirrup location with alternating hook sides and number five stirrups at twelve inches on center. Four number six slab dowels spaced at twelve inches on center with standard ninety-degree hooks at the bottom extend into the slab and beam intersection, maintaining a nine-inch minimum typical clearance. An optional construction joint is indicated at the top of the footing level, positioned below the top of the slab level as sized per plan. A separate detail callout shows a base plate with a thickness designated by 't' per schedule, set over a three-inch maximum non-shrink grout layer atop the concrete element. The base plate is secured by one and one-quarter-inch diameter anchor bolts with leveling nuts and minimum washers at oversized holes, featuring a one-foot-zero-inch embedment depth and a four-inch hook.

Members view this detail in full resolution, download the CAD files (SVG, PDF), and can adapt it in the built-in CAD editor — export DXF, DWG, or PDF.

Start membership

Similar details