Structural · S-3EKTR

Typical Concrete Curb on Metal Deck with Epoxy Dowels

Elements

Site / Paving Anchors / Embeds Reinforcing

Connections

About this detail

Two configurations for a concrete curb anchored to a metal deck slab apply based on curb width being either less than or equal to eight inches, or greater than eight inches. The curb features a one-half inch typical radius at top edges and maintains a three-quarter inch clearance. Reinforcement includes a continuous number three reinforcing bar at the center of the narrow curb, or number three bars spaced at twelve inches on center each way for the wider curb. Vertical anchorage is provided by number three dowels with a one-eighty-degree bend at the top, spaced at twenty-four inches on center. These dowels are installed into one-half-inch diameter by three-inch deep holes drilled and aligned with the low flute of the metal deck, then cleaned and set with epoxy.

Members view this detail in full resolution, download the CAD files (SVG, PDF), and can adapt it in the built-in CAD editor — export DXF, DWG, or PDF.

Start membership

Similar details