Manual swinging doors and gates require specific approach clearances and clear widths for accessibility compliance. The pull side requires a minimum dimension Y of 48 inches, increasing to 54 inches if a door closer is installed, with a 24-inch latch approach. The push side requires a minimum dimension X of 42 inches, increasing to 48 inches if a door closer is installed, with a 24-inch latch approach. The clear door width must maintain a minimum opening of 32 inches.
PULL SIDE NOTE: Y = 54" MIN IF DOOR HAS CLOSER NOTE: X - 48" MIN IF DOOR HAS CLOSER PUSH SIDE LATCH APPROACH 24" 24" Y = 48" MIN. X = 42" MIN. MINIMUM DOOR WIDTH CLEAR 32" MIN.
Members view this detail in full resolution, download the CAD files (SVG, PDF), and can adapt it in the built-in CAD editor — export DXF, DWG, or PDF.
Start membership