A door jamb clip detail showing the anchoring and framing assembly for a swing-out door opening. The door jamb clip is fastened using two one-quarter-inch Hilti Kwik KH-EZ anchors with a two-and-a-half-inch nominal embedment, two-inch minimum edge distance, and two-and-a-half-inch spacing at the door jamb per ICC-ESR 3027. Four-inch-long clips (OPG1999) are secured with three FH.12xa.S fasteners per clip. The assembly incorporates a system depth of four-and-one-half inches with a sill can depth of four-and-thirteen-sixteenths inches, framing profiles SCF326 and SC422, and designated line of door alignment.
GF100 DSO401H 51 2" 5" 1 2" D.L.O. DS002 DS002 DS45 OPG1999 4 1/8" LONG 4 PER CLIP FH.12xa.S A CW-801 G6 G5 M252 09 1 2" D.L.O. 2 3 4 " 1 3 4 " 4 1 2 " SYSTEM DEPTH DS002 DS002 5 16" SCF326 SC422 9 16 " OPG1999 4" LONG DOOR JAMB CLIP DETAIL 02 LINE OF DOOR (2) 1/4" HILTI KWIK KH-EZ W/ 2-1/2" EMBED & 2" MIN EDGE DISTANCE & 2-1/2" SPACING AT DOOR JAMB [ICC-ESR 3027] 3 PER CLIP FH.12xa.S 1" GF100 M252 (2) 1/4" HILTI KWIK KH-EZ W/ 2-1/2" NOMINAL EMBED & 2" MIN EDGE DISTANCE & 2-1/2" SPACING AT DOOR JAMB [ICC-ESR 3027] 4 1 2 " SYSTEM DEPTH 2 1 8 " 1 4 " 2 1 8 " 4 13 16 " SILL CAN DEPTH 3 16 " 3 16 " 13 3 16"
Members view this detail in full resolution, download the CAD files (SVG, PDF), and can adapt it in the built-in CAD editor — export DXF, DWG, or PDF.
Start membership